June 10, 2020
If you want to place an order for a custom skateboard of your desired graphics, following are the parts are required to form a complete.
Deck
For choosing right deck size we have made a thorough article about this. Read here.
Griptape
Add any of the griptape you wish to add which will sit on top of the skateboard deck to provide grip.
Hardware
Choose hardware of size 1in for regular skateboard set up. If you will use riser pads go for the size 1.25in. To know more about riser pads click here.
Trucks
Based on the size of deck you have chosen similarly choose the truck size for the same. SELECT Qty = 2 for trucks while checking out. Truck sizing is as given below:
Hanger width(in) |
Axle width (in) |
Deck it can fit |
5.00in |
7.618in |
7.75in |
5.375in |
8.00in |
8.00in,8.125in |
5.5in |
8.11in |
8.125in,8.25in |
5.75in |
8.30in |
8.25in |
6.00in |
8.62in |
8.5in,8.75in |
Wheels
Wheels you can select any of the sizes either 52mm, 54mm or 56mm based on your interest. If you want a board especially for tricks and stuff select size 52mm. For an all round performance select size 54mm. For more of transition skating go for the size 56mm (Do use riser pads to avoid wheelbite for the size 56mm)
Bearings
Add 1 set of bearings and your custom complete set up is ready. If you want us to assemble it and send let us know.
Comments will be approved before showing up.
October 30, 2022
July 06, 2021
Well! this article are for the first time buyers of skateboard. This for sure has happened to all of us atleast once when you owned your very first board and fell in love with it. How can I protect my skateboard graphics??!
This is one of the most common questioned asked. Skateboard is not a show piece, its meant for skating
July 06, 2021